2014年6月25日星期三

Spanish Customer Visit Our Factory

Spanish Customer visit our factory and had happy discussion.
www.suhangmachine.com



2014年6月17日星期二

Mexico Customer Visit Our Factory on 17th, June, 2014

Mexico Customer Visit Our Factory on 17th, June, 2014, they are very much satisfied with  our machines and we'v  had happy discussion with each other.


2014年6月11日星期三

Successful Installation of Shelves Roll Forming Machine for Canadian Customer

Our Shelves Roll Forming Machine was successfully installed and commissioned  in our Canadian Customer workshop on 10th, June, 2014







2014年6月10日星期二

Accuracy control for roll forming machine equipment,make precise goods

Many customer are really care about their products after roll forming. Customer’s need beautiful and smooth profiles which help their business cause you know no one like bad products. So what we should do is to guarantee the accuracy of their products which mean guarantee the accuracy of our roll forming machine. It include the profile size accuracy, the output length accuracy and cutting accuracy. 

First, we guarantee the profile size accuracy, the main point is to guarantee the designing of the rollers and shaft. All the rollers and shafts should be stricted control according to customer’s profile sizes and customer’s material. Usually the tolerance of rollers should be ±0.05mm to guarantee the profile sizes.  Also the gap of the roller and shafts should be controled in one small size, for example the gap should be ±0.1mm. If the gap is too big, the forming material will go to wrong direction which very bad situation. If the gap is too small, the rollers can’t installed on the shaft. 

Second,the output length accuracy. It is not so bad than the profile tolerance. But we should keep it in one acceptable range. For example, the tolerance is ±2mm for some products. But there mush be some higher requirements from customers no matter if it is necessary, customers are always going for perfect! Of course they will pay the price. Some of our measures like change the chain drive tobe gearbox, change the commom motor to be servo motor  and change the Combination of the chain to be single chain.,etc. The purpose is to reduce the inertia when cutting formed products.

The cutting accuracy is also very important for customers cause the end oof profile may deformed after cutting. So we should think about the cutting way, for example change the saw cutting to be hydraulic cutting, or change the hydraulic cutting to be saw cutting. That’s depend on customer’s material and products. Aslo how to make the cutting mould is also very important. The tolerance should me little to guarantee accuracy. But i hope customer to understand that usually the little deformation at the cutting end is can’t avoid no matter in China or other countries. 
So if we guarantee such accuracy, we should be sucessd in making one high standard equipment for our customers. That’s why many customers come back again for second cooperation with us. I hope more and more potential customer can know us and understand us. We are going for quality, but keep cheap price. Help customer is helping ourselves.

2014年6月6日星期五

INTERBUILD AFRICA 2014 INVITATION

You are warmly invitated to visit our booth at  2014 INTERBUILD AFRICA FAIR at Johannesburg August 20th-23th, our booth No is Q49.